Loading parts…
Drag to orbit · scroll or pinch to zoom · right-drag to pan. Tap the colour dots to try your own filament combo.
Print settings
- Filament
- 1.75 mm
- Nozzle
- 0.4 mm
- Layer height
- 0.2 mm, first layer 0.2 mm
- Supports
- none, all parts are pre-oriented
- Bed
- 220 × 220 mm or larger
| Part | Qty | Material | Walls | Infill | Filament | Note |
|---|---|---|---|---|---|---|
| Base | 1 | PLA | 3 | 15% gyroid | 257 g | Upright |
| Helipad | 1 | PLA | 2 | 100% | 1 g | 3 layers, print 1st |
| Lid face | 1 | PLA | 3 | 100% | 18 g | 3 layers, print 2nd |
| Lid body | 1 | PLA | 3 | 15% gyroid | 155 g | Print 3rd, over both |
| Latch | 2 | PETG best, PLA ok | 6 | 100% | 12 g | On its side |
| Lower insert | 1 | PLA | 2 | 8% gyroid | 200 g | 0.28 mm layers ok |
| Drone tray | 1 | PLA | 2 | 8% gyroid | 221 g | 0.28 mm layers ok |
| Whole case | 865 g | 290 m of 1.75 mm |
Filament by colour
Updates as you change colours above.
Sliced in OrcaSlicer for a Creality K1C, 0.4 nozzle, 0.2 mm layers. Weights use 1.24 g/cm³ PLA and 1.27 g/cm³ PETG. Your slicer may differ by around 10%.
Hardware
- Hinge: 2 × M3 × 50 socket-head screw and 2 × M3 nyloc nut. A 3 mm steel rod also works.
PETG latches keep their spring for longer. PLA slowly relaxes under constant tension.